View KP029J_611541.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

P0120009P
2W GaAs Power FET (Pb-Free Type)
Features
* Up to 2.7 GHz frequency band * Beyond +31 dBm output power * Up to +48dBm Output IP3 * High Drain Efficiency * 11dB Gain at 2.1GHz * SOT-89 SMT Package * Low Noise Figure
Pin No. 1 2, 4 3
Technical Note
SUMITOMO ELECTRIC Functional Diagram
Function Input/Gate Ground Output/Drain
4
1
Number of devices
2
3
Container 7" Reel Anti-static Bag
Ordering Information
Part No P0120009P KP029J Description GaAs Power FET 2.11-2.17GHz Application Circuit 1000 1
Applications
* Wireless communication system * Cellular, PCS, PHS, W-CDMA, WLAN
Description
P0120009P is a high performance GaAs MESFET housed in a low-cost SOT-89 package. Our originally developed "pulse-doped" channel structure has realized low distortion, which leads to high IP3. The channel structure also achieved an extremely low noise figure. The details about pulse-doped FET channel are described in our products catalog. Utilization of AuSn die attach has realized a low and stable thermal resistance. The lead frame is plated with Sn-Bi to make the device Pb-free. SEI's long history of manufacturing has cultivated high device reliability. The estimated MTTF of the FET is longer than 15years at Tj of 150C. You can see the details in Reliability and Quality Assurance.
Absolute Maximum Ratings (@Tc=25C)
Parameter Symbol Value Units Drain-Source Voltage Vds 10 V Gate-Source Voltage Vgs -4 V Drain Current Ids Idss --RF Input Power (*) Pin 23 dBm (continuous) Power Dissipation Pt 5.43 W (**) Junction Temperature Tj 150 C Storage Temperature Tstg - 40 to +150 C Tc: Case Temperature. Operating the device beyond any of these values may cause permanent damage. (*) Measured at 2.1GHz with our test fixture matched to IP3. (**) Recommended Tj under operation is below 125C. Values Typ. ----------33 Vds=8V Ids=400mA f=2.1GHz 11 ----48 57
Electrical Specifications (@Tc=25C)
Parameter DC Saturated Drain Current Transconductance Pinchoff Voltage Gate-Source Breakdown Voltage RF Thermal Resistance Frequency Output Power @ 1dB Gain Compression Small Signal Gain Output IP3 Power Added Efficiency Symbol Idss gm Vp |Vgs0| Rth f P1dB G IP3 add Test Conditions Vds=3V, Vg=0V Vds=8V, Ids=400mA Vds=8V, Ids=50mA Igso= - 50A Channel-Case Min. --450 - 3.0 3.0 --Max. 1400 --- 1.7 --22 2.7 --------Units mA mS V V C/W GHz dBm dB dBm %
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -1-
P0120009P
2W GaAs Power FET (Pb-Free Type)
Typical Characteristics
Technical Note
SUMITOMO ELECTRIC
Power Derating Curve
6 Total Power Dissipation (W) 5 4 3 2 1 00 50 100 150 Case Temperature (C) 200 Drain Current (mA) 1000 1500
Transfer Curve
Vgs=0V -0.5V -1.0V 500 -1.5V 0 -2.0V 0 2 4 Vds (V) 6 8
Load-pull Characteristics (Typical Data)
Tc=25C, Vds=8V, Ids=400mA, Common Source, Zo=50 (Calibrated to device leads)
6.0
1.0
0.6
0.8
90
2.4GHz
3.0
4.0 5.0
S11 2.4GHz S22
0.2 0.4 0.6 0.8 1.0 2.0 4.0 5.0 3.0
2.0
S21
1.2GHz S12 2.4GHz
10.0
Scale for |S12|
-180
0 0
1.2GHz
-0.2
1.2GHz
-10.0
2.4GHz 0.02
10.0
45
4.0 1.2GHz
35 13
2.0
0
- 0. 6
.0 -2
-1 35
.4 -0
Scale for |S21|
-0.8
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -2-
-1.0
-4. 0 - 5 .0
-3 .0
0. 4
0.2
0.04
0
0.06
5 5 -4
-90
P0120009P
2W GaAs Power FET (Pb-Free Type)
Tc=25C, Vds=8V, Ids=350mA, Common Source, Zo=50 (Calibrated to device leads)
1.0 90
Technical Note
SUMITOMO ELECTRIC
0.8
2.4GHz
2.0
6.0
3.0
4.0 5.0
0.6
4.0 2.0
1.2GHz S21 1.2GHz S12 2.4GHz 0.02 0.04 2.4GHz 0.06
0
S11 S22
0.2 0.4
2.4GHz
10.0 0.8 1.0 2.0 3.0 4.0 5.0 0.6
10.0
0
Scale for |S12|
-180
-10.0
0 0
1.2GHz
-0.2
1.2GHz
- 4. 0 0 -5.0 .0
- 0.
6
0 - 2.
-1
35
.4 -0
Scale for |S21|
-0.8
Ids=400mA Freq(GHz) S11 M ag 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0.807 0.812 0.815 0.819 0.822 0.823 0.827
-1.0
S11Ang 176.1 167.5 159.8 152.8 146.1 139.6 133.4 S11Ang 176.0 167.2 159.5 152.5 145.8 139.2 133.0
S21 M ag 4.225 3.630 3.179 2.826 2.545 2.316 2.124 S21 M ag 4.203 3.612 3.162 2.811 2.533 2.303 2.113
S21 Ang 66.1 58.4 51.2 44.3 37.4 30.7 24.0 S21 Ang 66.2 58.5 51.4 44.4 37.6 30.9 24.2
S12 M ag 0.042 0.045 0.048 0.050 0.053 0.056 0.060 S12 M ag 0.044 0.047 0.049 0.052 0.055 0.058 0.061
S12 Ang 31.9 30.5 29.2 27.5 25.1 22.6 19.5 S12 Ang 31.0 29.6 28.3 26.5 24.0 21.4 18.2
S22 M ag 0.380 0.387 0.394 0.399 0.403 0.406 0.408 S22 M ag 0.400 0.407 0.414 0.417 0.422 0.423 0.427
45 5 5 13
Ids=350mA Freq(GHz) S11 M ag 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0.808 0.812 0.818 0.821 0.823 0.824 0.828
[Note] You can download the S-parameter list from our web site: www.sei.co.jp/GaAsIC/
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -3-
-3 .0 0
0.. 4
0.2 2
4 -4 5
-90
S22 Ang 176.7 173.2 170.0 166.9 163.4 159.8 155.7 S22 Ang 175.6 171.8 168.6 165.3 161.6 157.9 153.3
P0120009P
2W GaAs Power FET (Pb-Free Type)
Ids=400mA
80 60 40 20 Pout (dBm) Gain (dB) IM3 (dBm) IP3 (dBm) IM3/Pout (dBc) add (%) 0 add -20 IM3 -40 -60 -80 -100 -15 -10 -5 0 5 10 15 20 25 IM3/Pout Gain Pout Pout (dBm) Gain (dB) IM3 (dBm) IP3 (dBm) IM3/Pout (dBc) add (%) IP3 80 60 40 20 0 Gain
Technical Note
SUMITOMO ELECTRIC Ids=350mA
IP3
Pout
add -20 IM3 -40 -60 -80 IM3/Pout
-100
-15
-10
-5
0
5
10
15
20
25
Pin (dBm)
Pin (dBm)
Device: P0120009P Frequency: f1=2.1GHz f2=2.101GHz Bias: Vds=8V, Ids=400mA Source Matching: Mag 0.74 Ang -156.6 Load Matching: Mag 0.554 Ang -171.5
Device: P0120009P Frequency: f1=2.1GHz f2=2.101GHz Bias: Vds=8V, Ids=350mA Source Matching: Mag 0.74 Ang -156.6 Load Matching: Mag 0.49 Ang -172.9
[Note] Pout and add are measured by one signal. The data for the figures above were measured with the load impedance matched to IP3.
Id=400mA Pin (dBm) -10.0 -5.0 0.0 5.0 10.0 15.0 20.0 Pin (dBm) -10.0 -5.0 0.0 5.0 10.0 15.0 20.0 Pout (dBm) 2.8 7.8 12.7 17.7 22.9 27.7 31.7 Pout (dBm) 2.2 7.5 12.5 17.5 22.7 27.5 31.6 Gain (dB) 12.8 12.8 12.7 12.7 12.9 12.7 11.7 Gain (dB) 12.2 12.5 12.5 12.5 12.7 12.5 11.6 IM3 (dBm) -72.9 -68.6 -57.7 -42.7 -25.1 2.7 17.7 IM3 (dBm) -72.1 -67.7 -57.6 -42.7 -23.9 3.4 20.9 IM3/Pout (dBc) -75.7 -76.3 -70.3 -60.3 -48.0 -25.0 -14.0 IM3/Pout (dBc) -74.3 -75.2 -70.0 -60.2 -46.7 -24.2 -10.7 IP3 (dBm) 40.6 45.7 47.8 47.8 46.6 39.3 35.2 IP3 (dBm) 39.4 45.2 47.1 47.3 45.8 38.5 33.2 Id (mA) 401.3 397.0 387.4 370.0 343.7 323.3 367.9 Id (mA) 346.7 342.5 333.5 317.3 298.0 289.5 352.1 add (%) 0.1 0.2 0.6 1.9 6.7 21.3 46.9 add (%) 0.1 0.2 0.6 2.1 7.5 23.1 47.3
Id=350mA
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -4-
P0120009P
2W GaAs Power FET (Pb-Free Type)
Tc= 25C, Vds=8V, Ids=400mA, Pin=5d Bm [Pout-Lstate] f = 2.1GHz pout : 0.54 169.9 Source : 0.81 -155.1 Pout max : 17.65dBm
+j50 +j25 +j100 +j25
Technical Note
SUMITOMO ELECTRIC
[IP3-Lstate] f1 = 2.1GHz f2 = 2.101GHz IP 3 : 0.55 -171.5 Source : 0.74 -156.6 IP3 max : 50.7d Bm
+j50 +j100
16.4 17.65 25 25 50 100 50.7 50 100
45.7 -j25 -j50 -j100 -j25 -j50 -j100
Tc= 25C, Vds=8V, Ids=350mA, Pin=5d Bm [Pout-Lstate] f = 2.1GHz pout : 0.54 169.9 Source : 0.81 -155.1 Pout max : 17.7d Bm
+j50 +j25 +j100 +j25
[IP3-Lstate] f1 = 2.1GHz f2 = 2.101GHz IP 3 : 0.49 -172.9 Source : 0.74 -156.6 IP3 max : 50.55d Bm
+j50 +j100
17.7 25 50 100 25 50.55 50 100
16.45
45.55
-j25 -j50
-j100
-j25 -j50
-j100
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -5-
P0120009P
2W GaAs Power FET (Pb-Free Type)
NF Characteristics Ids=400mA
1.0
0.8
Technical Note
SUMITOMO ELECTRIC
Ids=350mA
1.0
0.8
Ids=300mA
2.0
0.6
0.8
2.0
0.6
0.6
1.0
10.0
10.0
0.2
0.4
0.6
0.8 1.0
2.0
3.0 4.0 5.0
0.2
0.4
0.6
0.8 1.0
2.0
3.0 4.0 5.0
0.2
0.4
0.6
0.8 1.0
2.0
3.0 4.0 5.0
0
0
0
1.43
-0 .4
1.93
.0
1.36
-0 .4
-0
.4
.0
-2
-2
-0.6
-0.6
-0.8
-0.8
-0. 6
-1.0
-1.0
-0.8
[Note] The data for Smith charts were measured at frequency of 2GHz and Tc of 25C.
Vds=8V Freq. (GHz) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 NFmin (dB) 0.23 0.34 0.57 0.71 0.95 0.95 1.10 1.24 1.43 opt M ag Ang(deg) 0.34 -64.4 0.28 -6.2 0.26 48.8 0.35 92.7 0.41 128.6 0.51 153.6 0.55 -178.1 0.58 -152.3 0.61 -124.6 Rn/50 0.08 0.11 0.14 0.13 0.10 0.06 0.04 0.08 0.20 Vds=8V Freq. (GHz) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 NFmin (dB) 0.22 0.33 0.52 0.67 0.96 0.90 1.04 1.17 1.36 opt M ag Ang(deg) 0.33 -73.8 0.25 -11.0 0.21 46.0 0.33 89.9 0.36 129.2 0.48 153.1 0.52 -179.2 0.57 -153.2 0.58 -124.8 Rn/50 0.06 0.10 0.12 0.12 0.10 0.06 0.04 0.07 0.18 Ids=400mA Associated Gain(dB) 21.8 19.4 17.7 16.6 15.6 14.9 14.1 13.4 12.9 Ids=350mA Associated Gain(dB) 21.3 19.2 17.4 16.4 15.3 14.7 13.9 13.3 12.7 Vds=8V Freq. (GHz) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 NFmin (dB) 0.15 0.26 0.48 0.62 0.84 0.84 0.95 1.08 1.34 opt M ag Ang(deg) 0.33 -77.9 0.26 -17.4 0.19 39.7 0.30 86.8 0.34 126.2 0.45 151.0 0.50 179.4 0.54 -154.0 0.55 -123.9 Rn/50 0.06 0.09 0.12 0.11 0.10 0.06 0.04 0.06 0.17 Ids=300mA Associated Gain(dB) 21.1 19.0 17.1 16.1 15.1 14.4 13.7 13.1 12.5
2.0 1.8 1.6 1.4 1.2 NF (dB) 1.0 0.8 0.6 0.4 0.2 0.0 0 0.5 1.0 1.5 Frequency (GHz) 2.0 2.5
-1.0
Ids=400mA Ids=350mA Ids=300mA
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -6-
-2
.0
-3 .0 0
-3 .0 0
1.86
1.34 1.84
-4.0 . -5.0 0
-4.0 . -5.0 0
-4.0 . -5.0 0
-0.2
-0.2
-0.2
-1 -10.0
10.0
10.0
10.0
0.2 .2
-1 -10.0
0.2 .2
3.0 4.0 5.0
3.0 4.0 5.0
2.0
0. 4
0. 4
-1 -10.0
-3 .0 0
0. 4
3.0 4.0 5.0
10.0
0.2 .2
P0120009P
2W GaAs Power FET (Pb-Free Type)
Application Circuit : 2110-2170MHz
Technical Note
SUMITOMO ELECTRIC
C4 C2 RF in (Rs=50) C1 Z1 C3 Z2 Z3 L1
R2 C7 Z4 Z5 L2 Z6 L3 RF out (RL=50)
D.U.T
C6 R1 C5
Vg
Vd
KP029J
Ref. Des. R1 R2 C1 C2 C3 C4 C5 C6 C7 L1 L2 L3 Value 82 820 3pF 1pF 0.5pF 4pF 1F 1F 2pF 22nH 22nH 4.7nH Part Number SUSUMU RR0816 series
RF in
C1
C2 C3 R1 C5
Vg (-0.7~-2V)
C7 L1 C4 L2 R2 C6 L3
RF out
MURATA GRM18 series
Vd (+8V)
TOKO LL1608 series
20
S21
10
0
S11 S22 S12
-10
-20
Ref. Designator Z1 Z2 Z3 Z4 Z5 Z6
Electrical length @ 2.1GHz (deg) 31.76 4.08 13.61 8.62 6.38 4.54
S-parameters (dB)
-30 1.9 2.0 2.1 Frequency (GHz) 2.2 2.3
All microstrip lines have a line impedance of 50 .
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -7-
P0120009P
2W GaAs Power FET (Pb-Free Type)
[Typical Performance]
KP029J Application Circuit Vds=8V, Ids=400mA, Tc=25C Frequency characteristics were measured with Pout at 17dBm.
Pout, Gain, IP3, Ids vs Pin IP3
Technical Note
SUMITOMO ELECTRIC
50 45 40 Pout (dBm) Gain (dB) IP3 (dBm) 35 30 25 20 15 10 -4
450
-40 -45
IM3, IM5 vs Pout
400 Ids 350 IM3 (dBc) IM5 (dBc) Ids (mA)
-50 -55 -60 -65 -70 10 12 14 IM5
IM3
Pout Gain -2 0 2 4 6 8
300
250
16
18
20
22
Pin (dBm) 48 46 IP3 (dBm) 44 42 40 Vds=6V 38 36 2100 2120 2140 2160 2180 IP3 vs Fre quency Vds=8V 47 Vds=7V IP3 (dBm) 46 45 44 43 2100 48
Pout (dBm) IP3 vs Fre quency
Ids=400mA
Ids=360mA
Ids=320mA 2120 2140 2160 2180
Fre quency (MHz) 13.4 13.3 13.2 Gain (dB) 13.1 13.0 12.9 12.8 12.7 2100 2120 2140 2160 2180 12.9 12.8 2100 Gain vs Fre quency Vds=7V Vds=8V Vds=6V Gain (dB) 13.2 13.1 13.0 13.3
Fre quency (MHz) Gain vs Fre quency Ids=400mA Ids=320mA Ids=360mA
2120
2140
2160
2180
Fre quency (MHz)
Fre quency (MHz)
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -8-
P0120009P
2W GaAs Power FET (Pb-Free Type)
Caution: Power Supply Sequence
For safe operation, electric power should be supplied in following sequence. First, the negative voltage should be applied on the gate, and the voltage should be more negative than the pinch-off voltage when you turn on the power supply. Then, drain bias can be applied. Finally, you can turn on the RF signal. When turning off the power supply, the sequence should be (1)RF signal (2)Drain (3)Gate.
+8V
Technical Note
SUMITOMO ELECTRIC
R1
R3
Vds
Q1a
Q1b
R4
Gate Vo ltage Drain Vo ltage
0V
On Bias Voltage Off
R2 R5 Vgs
P0110009P P0120009P Application Circuit GND
0V
Bias Voltage On More Than 1mS Off More Than 1mS
GND -5V
Bias Circuit
[Passive Biasing] If you use a fixed bias circuit, you sometimes need to control the gate bias to get the same Ids, since the devices have some margin of pinch-off voltage (Vp) variation depending on the wafer lots. If you employ a fixed Vgs biasing for your system, you should closely monitor the drain current, particularly when new wafer lots are introduced. [Active Biasing] We recommend using an active bias circuit, which can eliminate the influence of Vp variation. An example of an active bias circuit called "current mirror " is shown below. Here, two PNP transistors having the minimum variation of Ibe characteristics are used. These transistors adjust Vgs by changing Vds automatically. It will realize the constant current characteristics, regardless of the temperature. The circuit should be connected directly in line with where the voltage supplies would be normally connected with the application circuit. Of course a matching circuit is required, but it is not shown in this figure. [Note] In the measurements of RF performance (Pout vs Pin, etc) using the application circuit described before, the active bias circuit herein was not utilized. The application circuits were biased directly from two power supplies.
Vds Ids Q1 R1 R2 R3 R4 R5
+7.9V 400mA UM T1N (Rohm) 20 1/10W 2.4k 1/10W 0.15 RL series (SUSUM U) 1k 1/10W 1.3k 1/10W
If you used Ids other than 400mA, you can calculate the resistance values as follows: R4 set to be 1k I2:Ic of Q1b I1: Ic of Q1a Vbe1: Vbe of Q1a Vbe2: Vbe of Q1b R1=(+8V-Vds+Vbe2-Vbe1)/I1=(+8V-Vds)/I1 R2=(Vds-Vbe2)/I1 R3=(+8V-Vds)/(Ids+I2) R5=|-5V-Vgs|/I2
Attention to Heat Radiation
In the layout design of the printed circuit board (PCB) on which the power FETs are attached, the heat radiation to minimize the device junction temperature should be taken into account, since it significantly affects the MTTF and RF performance. In any environment, the junction temperature should be lower than the absolute maximum rating during the device operation and it is recommended that the thermal design has enough margin.
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -9-
P0120009P
2W GaAs Power FET (Pb-Free Type)
The junction temperature can be calculated by the following formula. Tjmax=(Vds*Ids-Pout)(Rth+Rboard+Rhs)+Ta Pout: Output power Rth: Thermal resistance between channel and case Rboard: Thermal resistance of PCB Rhs: Thermal resistance of heat sink Ta: Ambient temperature Tjmax: Maximum junction temperature Generally, there are two ways of heat radiation. One is the plated thru hole and the other is the heat sink. Key points will be illustrated in each case below. Note that no measure against oscillation is adopted in the figures. In the design of circuit and layout, you should take stabilizing into account if necessary. [Using Thru Hole] Multiple plated thru holes are required directly below the device. The PCB is screwed on the mounting plate or the heat sink to lower the thermal resistance of the PCB. Lay out a large ground pad area with multiple plated thru holes around pin 4 of the device. The required matching and feedback circuit described in the application circuit examples should be connected to the device, although it is not shown in the figure below.
Technical Note
SUMITOMO ELECTRIC
[Using Heat Sink] If you cannot get the junction temperature lower than the absolute maximum rating only with the plated thru holes, then you need to employ the heat sink. Attaching the heat sink directly under pin 4 of the device improves the thermal resistance between junction and ambient.
3 Plated Thru Hole for 2.5 M achine Screws
4-R0.3
2
5 Soldermask Keepout
Heatsink 1.9x2.85 (4-R0.3)
0.4 Plated Thru Holes
2.95
Grand Plane Package Outline
Grand Plane
0.6
3 Plated Thru Hole for 2.5 M achine Screws
5 Soldermask Keepout
[Note]
Ground/thermal vias are critical for the proper device
performance. Drills of the recommended diameters should be used in the fabrication of vias. Add as much copper a s possible to inner and outer layers near the part to ensure optimal thermal performance. Mounting screws can be added near the part to fasten the board to heat sink. Ensure that the ground/thermal via region contacts the heat sink. Do not put solder mask on the backside of the PCB in the region where the board contacts the heat sink. RF trace width depends upon the PCB material and construction. Use 1 oz. Copper minimum.
3 Plated Thru Hole for 2.5 M achine Screws 5 Soldermask Keepout 0.3 Plated Thru Holes
Package Outline
0.4 Plated Thru Holes
Grand Plane
5 Soldermask
Keepout
3 Plated Thru Hole for 2.5 M achine Screws
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -10-
P0120009P
2W GaAs Power FET (Pb-Free Type)
Package Drawing
4.5 0.1 1.6+0.15 -0.2 4.0 0.25 2.5 0.1 0.1 0.05
Technical Note
SUMITOMO ELECTRIC
[Note] The reflow profile is different from the one for Sn-Pb plating. If you use a soldering iron to attach the devices, please beware of the followings. (1) The tip of the iron should be grounded. Or you should use an iron that is electrostatic discharge proof. (2) The temperature of the iron tip should be lower than 240C and the soldering should be completed within 10 seconds.
1.6 0.3
1.1 0.3
0.42 0.06
0.47 0.06
1 2 3
0.42 0.06
0.4+0.03 -0.02 1.5 0.1
Attention to ESD
Generally, GaAs devices are very sensitive to electrostatic discharge (ESD). To reduce the ESD damage, please pay attention to the followings. The devices should be stored with the electrodes short-circuited by conductive materials. The workstation and tools should be grounded for safe dissipation of the static charges in the environment. The workpeople are to wear anti-static clothing and wrist straps. For safety reasons, resistance of 10M or so should exist between workpeople and ground.
1.5 0.08 1.5 0.08
Laser Marking
1.65MAX B A: 0.67+0 -0.1 B: 0.45 A 1.3+0.1 -0
Attention to Moisture
The moisture sensitivity level (MSL) of P0120009P is 3, which means that the "floor life" is 168 hours below 30C with relative humidity (Rh) of 60%. The devices are usually shipped in moisture-resistant alumina-laminated packages. After breaking the packages, they are to be stored under normal temperature and humidity (5-35C, 45-75%), with no corrosive gases or dust in the environment. Assemble the devices within 168 hours after breaking the package, or you have to bake them at 85C for 24 hours before assembling.
123
(0.65)
**P
1,2,3: Lot No. * * P: Product Type
Convection Reflow Profile (Recommended)
300 260 5C 5sec max
Reliability and Environmental Issues
The detailed reliability information can be seen in Reliability and Quality Assurance, which you can download from our web site. SEI's Yokohama Works, where the devices are manufactured, has been accredited ISO-14001 since 1999. We control the toxic materials in our products in accordance with PRTR regulation.
Temperature (C)
200
100
Time above 230C < 45 sec Preheat:160C 90 sec
Lead and Fluoride
To realize Pb-free products, Sn-Bi is used for the lead frame plating. Any fluoride that has been determined by the Montreal agreement is not used in the products.
0
0
60
120
180
240
Time (sec)
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -11-
P0120009P
2W GaAs Power FET (Pb-Free Type)
Caution
GaAs FET chips are used in P0120009P. For safety reasons, you should attend to the following matters: (1) Do not put the products in your mouse. (2) Do not make the products into gases or powders, by burning, breaking or chemical treatments.
Technical Note
SUMITOMO ELECTRIC
(3) In case you abandon the products, you should obey the related laws and regulations.
Technical Inquiries are Welcome
SEI welcomes technical questions from any customers. The e-mail is GaAsIC-ml@ml.sei.co.jp. You can also contact our regional offices as below.
Worldwide Contacts
[Europe]
Sumitomo Electric Europe Ltd. 220 Centennial Park, Centennial Avenue, Elstree, Herts. WD6 3SL U.K. Tel : +44-(0)20-8953-3369, Fax : +44-(0)20-8207-5950 URL : http://www.sumielectric.com
[U.S.A.]
Sumitomo Electric U.S.A., Inc. 3235 Kifer Road, Suite 150 Santa Clara, CA 95051-0815 USA Tel : +1-408-737-8517 Fax : +1-408-734-8881
[Asia/Pacific]
Sumitomo Electric Industries, Ltd. Photo-Electron Device Division, Electron Devices Department 1, Taya-cho, Sakae-ku, Yokohama, Kanagawa, 244-8588 Japan Tel : +81-(0)45-853-7263, Fax : +81-(0)45-853-1291 URL: http://www.sei.co.jp/GaAsIC/
E-mail: GaAsIC-ml@ml.sei.co.jp
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -12-
P0120009P
2W GaAs Power FET (Pb-Free Type)
Technical Note
SUMITOMO ELECTRIC
The information in this document is subject to change without notice. Please refer for the most
up-to-date information before you start design using SEI's devices.
Any part of this document may not be reproduced or copied. SEI does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from the use of SEI's products described in this documents. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of SEI or others.
Descriptions of circuits and other related information in this document are for illustrative purpose in the
examples of the device operation and application. SEI does not assume any responsibility for any losses incurred by customers or third parties arising from the use of the circuits and other related information in this document.
SEI's semi-conductor device products are designed and manufactured for use in the standard
communication equipment. Customers that wish to use these products in applications not intended by SEI must contact SEI' sales representatives in advance.
Generally, it is impossible to eliminate completely the defects in semi-conductor products, while SEI has
been continually improving the quality and reliability of the products. SEI does not assume any responsibility for any losses incurred by customers or third parties by or arising from the use of SEI's semi-conductor products. Customers are to incorporate sufficient safety measures in the design such as redundancy, fire-containment and anti-failure features.
Specifications and information are subject to change without notice. 2003-11 Sumitomo Electric Industries, Ltd. 1,Taya-cho, Sakae-ku, Yokohama, 244-8588 Japan Phone: +81-45-853-7263 Fax: +81-45-853-1291 e-mail : GaAsIC-ml@ml.sei.co.jp Web Site: www.sei.co.jp/GaAsIC/ -13-

▲Up To Search▲

Price & Availability of KP029J

	To Download KP029J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .